aboutsummaryrefslogtreecommitdiffstats
path: root/config
diff options
context:
space:
mode:
Diffstat (limited to 'config')
-rw-r--r--config/redshift/redshift.conf70
1 files changed, 70 insertions, 0 deletions
diff --git a/config/redshift/redshift.conf b/config/redshift/redshift.conf
new file mode 100644
index 0000000..8c77d94
--- /dev/null
+++ b/config/redshift/redshift.conf
@@ -0,0 +1,70 @@
+; Global settings for redshift
+[redshift]
+; Set the day and night screen temperatures
+temp-day=5700
+temp-night=3500
+
+; Disable the smooth fade between temperatures when Redshift starts and stops.
+; 0 will cause an immediate change between screen temperatures.
+; 1 will gradually apply the new screen temperature over a couple of seconds.
+fade=1
+
+; Solar elevation thresholds.
+; By default, Redshift will use the current elevation of the sun to determine
+; whether it is daytime, night or in transition (dawn/dusk). When the sun is
+; above the degrees specified with elevation-high it is considered daytime and
+; below elevation-low it is considered night.
+;elevation-high=3
+;elevation-low=-6
+
+; Custom dawn/dusk intervals.
+; Instead of using the solar elevation, the time intervals of dawn and dusk
+; can be specified manually. The times must be specified as HH:MM in 24-hour
+; format.
+;dawn-time=6:00-7:45
+;dusk-time=18:35-20:15
+
+; Set the screen brightness. Default is 1.0.
+;brightness=0.9
+; It is also possible to use different settings for day and night
+; since version 1.8.
+;brightness-day=0.7
+;brightness-night=0.4
+; Set the screen gamma (for all colors, or each color channel
+; individually)
+gamma=0.8
+;gamma=0.8:0.7:0.8
+; This can also be set individually for day and night since
+; version 1.10.
+;gamma-day=0.8:0.7:0.8
+;gamma-night=0.6
+
+; Set the location-provider: 'geoclue2', 'manual'
+; type 'redshift -l list' to see possible values.
+; The location provider settings are in a different section.
+location-provider=manual
+
+; Set the adjustment-method: 'randr', 'vidmode'
+; type 'redshift -m list' to see all possible values.
+; 'randr' is the preferred method, 'vidmode' is an older API.
+; but works in some cases when 'randr' does not.
+; The adjustment method settings are in a different section.
+adjustment-method=randr
+
+; Configuration of the location-provider:
+; type 'redshift -l PROVIDER:help' to see the settings.
+; ex: 'redshift -l manual:help'
+; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
+; are negative numbers.
+[manual]
+lat=52.523
+lon=13.238
+
+; Configuration of the adjustment-method
+; type 'redshift -m METHOD:help' to see the settings.
+; ex: 'redshift -m randr:help'
+; In this example, randr is configured to adjust only screen 0.
+; Note that the numbering starts from 0, so this is actually the first screen.
+; If this option is not specified, Redshift will try to adjust _all_ screens.
+[randr]
+screen=0