[DROP] mpd

1 files changed, 0 insertions, 412 deletions

diff --git a/config/mpd/mpd.conf b/config/mpd/mpd.conf
deleted file mode 100644
index 618ffb5..0000000
--- a/config/mpd/mpd.conf
+++ /dev/null
@@ -1,412 +0,0 @@
-# An example configuration file for MPD.
-# Read the user manual for documentation: http://www.musicpd.org/doc/user/
-
-
-# Files and directories #######################################################
-#
-# This setting controls the top directory which MPD will search to discover the
-# available audio files and add them to the daemon's online database. This
-# setting defaults to the XDG directory, otherwise the music directory will be
-# be disabled and audio files will only be accepted over ipc socket (using
-# file:// protocol) or streaming files over an accepted protocol.
-#
-music_directory		"~/Music"
-#
-# This setting sets the MPD internal playlist directory. The purpose of this
-# directory is storage for playlists created by MPD. The server will use
-# playlist files not created by the server but only if they are in the MPD
-# format. This setting defaults to playlist saving being disabled.
-#
-playlist_directory		"~/.config/mpd/playlists"
-#
-# This setting sets the location of the MPD database. This file is used to
-# load the database at server start up and store the database while the
-# server is not up. This setting defaults to disabled which will allow
-# MPD to accept files over ipc socket (using file:// protocol) or streaming
-# files over an accepted protocol.
-#
-db_file			"~/.config/mpd/database"
-#
-# These settings are the locations for the daemon log files for the daemon.
-# These logs are great for troubleshooting, depending on your log_level
-# settings.
-#
-# The special value "syslog" makes MPD use the local syslog daemon. This
-# setting defaults to logging to syslog, otherwise logging is disabled.
-#
-log_file			"~/.config/mpd/log"
-#
-# This setting sets the location of the file which stores the process ID
-# for use of mpd --kill and some init scripts. This setting is disabled by
-# default and the pid file will not be stored.
-#
-#pid_file			"~/.mpd/pid"
-#
-# This setting sets the location of the file which contains information about
-# most variables to get MPD back into the same general shape it was in before
-# it was brought down. This setting is disabled by default and the server
-# state will be reset on server start up.
-#
-#state_file			"~/.mpd/state"
-#
-# The location of the sticker database.  This is a database which
-# manages dynamic information attached to songs.
-#
-#sticker_file			"~/.mpd/sticker.sql"
-#
-###############################################################################
-
-
-# General music daemon options ################################################
-#
-# This setting specifies the user that MPD will run as. MPD should never run as
-# root and you may use this setting to make MPD change its user ID after
-# initialization. This setting is disabled by default and MPD is run as the
-# current user.
-#
-#user				"nobody"
-#
-# This setting specifies the group that MPD will run as. If not specified
-# primary group of user specified with "user" setting will be used (if set).
-# This is useful if MPD needs to be a member of group such as "audio" to
-# have permission to use sound card.
-#
-#group				"nogroup"
-#
-# This setting sets the address for the daemon to listen on. Careful attention
-# should be paid if this is assigned to anything other then the default, any.
-# This setting can deny access to control of the daemon.
-#
-# For network
-#bind_to_address		"any"
-#
-# And for Unix Socket
-#bind_to_address		"~/.mpd/socket"
-#
-# This setting is the TCP port that is desired for the daemon to get assigned
-# to.
-#
-#port				"6600"
-#
-# This setting controls the type of information which is logged. Available
-# setting arguments are "default", "secure" or "verbose". The "verbose" setting
-# argument is recommended for troubleshooting, though can quickly stretch
-# available resources on limited hardware storage.
-#
-#log_level			"default"
-#
-# If you have a problem with your MP3s ending abruptly it is recommended that
-# you set this argument to "no" to attempt to fix the problem. If this solves
-# the problem, it is highly recommended to fix the MP3 files with vbrfix
-# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
-# point gapless MP3 playback can be enabled.
-#
-#gapless_mp3_playback			"yes"
-#
-# Setting "restore_paused" to "yes" puts MPD into pause mode instead
-# of starting playback after startup.
-#
-#restore_paused "no"
-#
-# This setting enables MPD to create playlists in a format usable by other
-# music players.
-#
-#save_absolute_paths_in_playlists	"no"
-#
-# This setting defines a list of tag types that will be extracted during the
-# audio file discovery process. The complete list of possible values can be
-# found in the user manual.
-#metadata_to_use	"artist,album,title,track,name,genre,date,composer,performer,disc"
-#
-# This setting enables automatic update of MPD's database when files in
-# music_directory are changed.
-#
-#auto_update	"yes"
-#
-# Limit the depth of the directories being watched, 0 means only watch
-# the music directory itself.  There is no limit by default.
-#
-#auto_update_depth "3"
-#
-###############################################################################
-
-
-# Symbolic link behavior ######################################################
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links outside of the configured music_directory.
-#
-#follow_outside_symlinks	"yes"
-#
-# If this setting is set to "yes", MPD will discover audio files by following
-# symbolic links inside of the configured music_directory.
-#
-#follow_inside_symlinks		"yes"
-#
-###############################################################################
-
-
-# Zeroconf / Avahi Service Discovery ##########################################
-#
-# If this setting is set to "yes", service information will be published with
-# Zeroconf / Avahi.
-#
-#zeroconf_enabled		"yes"
-#
-# The argument to this setting will be the Zeroconf / Avahi unique name for
-# this MPD server on the network.
-#
-#zeroconf_name			"Music Player"
-#
-###############################################################################
-
-
-# Permissions #################################################################
-#
-# If this setting is set, MPD will require password authorization. The password
-# can setting can be specified multiple times for different password profiles.
-#
-#password                        "password@read,add,control,admin"
-#
-# This setting specifies the permissions a user has who has not yet logged in.
-#
-#default_permissions             "read,add,control,admin"
-#
-###############################################################################
-
-
-# Database #######################################################################
-#
-
-#database {
-#       plugin "proxy"
-#       host "other.mpd.host"
-#       port "6600"
-#}
-
-# Input #######################################################################
-#
-
-input {
-        plugin "curl"
-#       proxy "proxy.isp.com:8080"
-#       proxy_user "user"
-#       proxy_password "password"
-}
-
-#
-###############################################################################
-
-# Audio Output ################################################################
-#
-# MPD supports various audio output types, as well as playing through multiple
-# audio outputs at the same time, through multiple audio_output settings
-# blocks. Setting this block is optional, though the server will only attempt
-# autodetection for one sound card.
-#
-# An example of an ALSA output:
-#
-#audio_output {
-#	type		"alsa"
-#	name		"My ALSA Device"
-##	device		"hw:0,0"	# optional
-##	mixer_type      "hardware"	# optional
-##	mixer_device	"default"	# optional
-##	mixer_control	"PCM"		# optional
-##	mixer_index	"0"		# optional
-#}
-#
-# An example of an OSS output:
-#
-#audio_output {
-#	type		"oss"
-#	name		"My OSS Device"
-##	device		"/dev/dsp"	# optional
-##	mixer_type      "hardware"	# optional
-##	mixer_device	"/dev/mixer"	# optional
-##	mixer_control	"PCM"		# optional
-#}
-#
-# An example of a shout output (for streaming to Icecast):
-#
-#audio_output {
-#	type		"shout"
-#	encoder		"vorbis"		# optional
-#	name		"My Shout Stream"
-#	host		"localhost"
-#	port		"8000"
-#	mount		"/mpd.ogg"
-#	password	"hackme"
-#	quality		"5.0"
-#	bitrate		"128"
-#	format		"44100:16:1"
-##	protocol	"icecast2"		# optional
-##	user		"source"		# optional
-##	description	"My Stream Description"	# optional
-##	url		"http://example.com"	# optional
-##	genre		"jazz"			# optional
-##	public		"no"			# optional
-##	timeout		"2"			# optional
-##	mixer_type      "software"		# optional
-#}
-#
-# An example of a recorder output:
-#
-#audio_output {
-#	type		"recorder"
-#	name		"My recorder"
-#	encoder		"vorbis"		# optional, vorbis or lame
-#	path		"/var/lib/mpd/recorder/mpd.ogg"
-##	quality		"5.0"			# do not define if bitrate is defined
-#	bitrate		"128"			# do not define if quality is defined
-#	format		"44100:16:1"
-#}
-#
-# An example of a httpd output (built-in HTTP streaming server):
-#
-#audio_output {
-#	type		"httpd"
-#	name		"My HTTP Stream"
-#	encoder		"vorbis"		# optional, vorbis or lame
-#	port		"8000"
-#	bind_to_address	"0.0.0.0"		# optional, IPv4 or IPv6
-##	quality		"5.0"			# do not define if bitrate is defined
-#	bitrate		"128"			# do not define if quality is defined
-#	format		"44100:16:1"
-#	max_clients	"0"			# optional 0=no limit
-#}
-#
-# An example of a pulseaudio output (streaming to a remote pulseaudio server)
-#
-#audio_output {
-#	type		"pulse"
-#	name		"My Pulse Output"
-##	server		"remote_server"		# optional
-##	sink		"remote_server_sink"	# optional
-#}
-#
-# An example of a winmm output (Windows multimedia API).
-#
-#audio_output {
-#	type		"winmm"
-#	name		"My WinMM output"
-##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#		or
-##	device		"0"		# optional
-##	mixer_type	"hardware"	# optional
-#}
-#
-# An example of an openal output.
-#
-#audio_output {
-#	type		"openal"
-#	name		"My OpenAL output"
-##	device		"Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
-#}
-#
-## Example "pipe" output:
-#
-#audio_output {
-#	type		"pipe"
-#	name		"my pipe"
-#	command		"aplay -f cd 2>/dev/null"
-## Or if you're want to use AudioCompress
-#	command		"AudioCompress -m | aplay -f cd 2>/dev/null"
-## Or to send raw PCM stream through PCM:
-#	command		"nc example.org 8765"
-#	format		"44100:16:2"
-#}
-#
-## An example of a null output (for no audio output):
-#
-#audio_output {
-#	type		"null"
-#	name		"My Null Output"
-#	mixer_type      "none"			# optional
-#}
-#
-# If MPD has been compiled with libsamplerate support, this setting specifies
-# the sample rate converter to use.  Possible values can be found in the
-# mpd.conf man page or the libsamplerate documentation. By default, this is
-# setting is disabled.
-#
-#samplerate_converter		"Fastest Sinc Interpolator"
-#
-###############################################################################
-
-
-# Normalization automatic volume adjustments ##################################
-#
-# This setting specifies the type of ReplayGain to use. This setting can have
-# the argument "off", "album", "track" or "auto". "auto" is a special mode that
-# chooses between "track" and "album" depending on the current state of
-# random playback. If random playback is enabled then "track" mode is used.
-# See <http://www.replaygain.org> for more details about ReplayGain.
-# This setting is off by default.
-#
-#replaygain			"album"
-#
-# This setting sets the pre-amp used for files that have ReplayGain tags. By
-# default this setting is disabled.
-#
-#replaygain_preamp		"0"
-#
-# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
-# By default this setting is disabled.
-#
-#replaygain_missing_preamp	"0"
-#
-# This setting enables or disables ReplayGain limiting.
-# MPD calculates actual amplification based on the ReplayGain tags
-# and replaygain_preamp / replaygain_missing_preamp setting.
-# If replaygain_limit is enabled MPD will never amplify audio signal
-# above its original level. If replaygain_limit is disabled such amplification
-# might occur. By default this setting is enabled.
-#
-#replaygain_limit		"yes"
-#
-# This setting enables on-the-fly normalization volume adjustment. This will
-# result in the volume of all playing audio to be adjusted so the output has
-# equal "loudness". This setting is disabled by default.
-#
-#volume_normalization		"no"
-#
-###############################################################################
-
-# Character Encoding ##########################################################
-#
-# If file or directory names do not display correctly for your locale then you
-# may need to modify this setting.
-#
-#filesystem_charset		"UTF-8"
-#
-# This setting controls the encoding that ID3v1 tags should be converted from.
-#
-#id3v1_encoding			"ISO-8859-1"
-#
-###############################################################################
-
-
-# SIDPlay decoder #############################################################
-#
-# songlength_database:
-#  Location of your songlengths file, as distributed with the HVSC.
-#  The sidplay plugin checks this for matching MD5 fingerprints.
-#  See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
-#
-# default_songlength:
-#  This is the default playing time in seconds for songs not in the
-#  songlength database, or in case you're not using a database.
-#  A value of 0 means play indefinitely.
-#
-# filter:
-#  Turns the SID filter emulation on or off.
-#
-#decoder {
-#	plugin			"sidplay"
-#	songlength_database	"/media/C64Music/DOCUMENTS/Songlengths.txt"
-#	default_songlength	"120"
-#	filter "true"
-#}
-#
-###############################################################################